CVE-2024-26830

Vulnérabilité élevée dans Linux (Linux)

CVSS 8.4 · Élevée
EPSS 0.2%
Linux•Linux•Versions : 6.6.18, <=6.1.*, 6.8, <=*, 700bbf6c1f9e4ab055528d5ab4ac5815fe4a6c1b, <3.14, <1c981792e4ccbc134b468797acdd7781959e6893, <=6.7.*, <73d9629e1c8c1982f13688c4d1019c3994647ccc, <be147926140ac48022c9605d7ab0a67387e4b404, <=6.6.*, 0, 3.14, 6.1.79, 6.7.6, <d250a81ba813a93563be68072c563aa1e346346d

Description

In the Linux kernel, the following vulnerability has been resolved: i40e: Do not allow untrusted VF to remove administratively set MAC Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed. Do not allow untrusted VF to remove primary MAC when it was set administratively by PF. Reproducer: 1) Create VF 2) Set VF interface up 3) Administratively set the VF's MAC 4) Put VF interface down [root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs [root@host ~]# ip link set enp2s0f0v0 up [root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off [root@host ~]# ip link set enp2s0f0v0 down [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off

Gravité et risque d'exploitation

CVE-2024-26830 obtient un score CVSS de 8.4/10, soit une gravité élevée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.23 %, ce qui la place devant 13.3 % des CVE référencées.

Que faire ?

  • Vérifiez si Linux (versions 6.6.18, <=6.1.*, 6.8, <=*, 700bbf6c1f9e4ab055528d5ab4ac5815fe4a6c1b, <3.14, <1c981792e4ccbc134b468797acdd7781959e6893, <=6.7.*, <73d9629e1c8c1982f13688c4d1019c3994647ccc, <be147926140ac48022c9605d7ab0a67387e4b404, <=6.6.*, 0, 3.14, 6.1.79, 6.7.6, <d250a81ba813a93563be68072c563aa1e346346d) est présent sur votre parc.
  • Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
  • À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
  • Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.

Références