CVE-2025-68380

Vulnérabilité non évaluée dans Linux (Linux)

CVSS 0.0 · Non évaluée
EPSS 0.2%
Linux•Linux•Versions : <=6.1.*, <=6.12.*, 5.16, 6.18.2, <6b1a0da75932353f66e710976ca85a7131f647ff, 6.1.160, 0, <4a013ca2d490c73c40588d62712ffaa432046a04, 6.6.120, 6.17.13, <097c870b91817779e5a312c6539099a884b1fe2b, <4304bd7a334e981f189b9973056a58f84cc2b482, <=6.6.*, <5.16, <=6.18.*, 61fe43e7216df6e9a912d831aafc7142fa20f280, 6.12.63, <381096a417b7019896e93e86f4c585c592bf98e2, <=*, <=6.17.*, 6.19, <92791290e4f6a1de25d35af792ab8918a70737f6

Description

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix peer HE MCS assignment In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to firmware as receive MCS while peer's receive MCS sent as transmit MCS, which goes against firmwire's definition. While connecting to a misbehaved AP that advertises 0xffff (meaning not supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff is assigned to he_mcs->rx_mcs_set field. Ext Tag: HE Capabilities [...] Supported HE-MCS and NSS Set [...] Rx and Tx MCS Maps 160 MHz [...] Tx HE-MCS Map 160 MHz: 0xffff Swap the assignment to fix this issue. As the HE rate control mask is meant to limit our own transmit MCS, it needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive MCS. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Gravité et risque d'exploitation

CVE-2025-68380 obtient un score CVSS de 0.0/10, soit une gravité non évaluée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.20 %, ce qui la place devant 9.5 % des CVE référencées.

Que faire ?

  • Vérifiez si Linux (versions <=6.1.*, <=6.12.*, 5.16, 6.18.2, <6b1a0da75932353f66e710976ca85a7131f647ff, 6.1.160, 0, <4a013ca2d490c73c40588d62712ffaa432046a04, 6.6.120, 6.17.13, <097c870b91817779e5a312c6539099a884b1fe2b, <4304bd7a334e981f189b9973056a58f84cc2b482, <=6.6.*, <5.16, <=6.18.*, 61fe43e7216df6e9a912d831aafc7142fa20f280, 6.12.63, <381096a417b7019896e93e86f4c585c592bf98e2, <=*, <=6.17.*, 6.19, <92791290e4f6a1de25d35af792ab8918a70737f6) est présent sur votre parc.
  • Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
  • À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
  • Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.

Références