CVE-2026-19673
Vulnérabilité élevée dans zephyr (zephyrproject)
Description
ethernet_recv() in subsys/net/l2/ethernet/ethernet.c validates only that the first net_buf of a received frame holds a plain 14-byte struct net_eth_hdr. When the ethertype is 0x8100 and VLAN is enabled on the interface, the same buffer is reinterpreted as the 18-byte struct net_eth_vlan_hdr without re-checking the length: the VLAN TCI and the inner ethertype are read from offsets 14..17, past pkt->buffer->len, and hdr_len is raised to 18 so the subsequent net_buf_pull() removes more bytes than the buffer holds. A single unauthenticated frame of 14 to 17 bytes carrying the VLAN ethertype triggers this. No knowledge of the node's VLAN configuration is needed: net_eth_get_vlan_iface() returns the base interface for the priority tag 0, and a broadcast destination address satisfies the "frame is for me" test, so a 16-byte broadcast frame with ethertype 0x8100 and TCI 0x0000 reaches the pull. Nothing in the receive path enforces the 60-byte Ethernet minimum — the USB CDC ECM and CDC NCM gadget classes in particular hand host-supplied frames of any non-zero length straight to net_recv_data(). With assertions enabled, net_buf_simple_pull() asserts and the node panics. In a production build (assertions and CONFIG_NET_BUF_HARDENING off) the uint16_t buffer length underflows to 65534 and buf->data is advanced past the end of the fragment's storage, so every later parser reads far outside the buffer and any net_buf_add() on that fragment computes tailroom from the underflowed length. The result is a reliable remote denial of service and out-of-bounds access with information-disclosure and corruption potential. Only configurations built with CONFIG_NET_VLAN=y that have a VLAN enabled on the receiving Ethernet interface, and whose MAC does not strip VLAN tags in hardware (ETHERNET_HW_VLAN_TAG_STRIP), are affected. The fix rejects the frame before the tag is read, so hdr_len is thereafter either 14 or 18 with both sizes validated against pkt->buffer->len.
Gravité et risque d'exploitation
CVE-2026-19673 obtient un score CVSS de 7.1/10, soit une gravité élevée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.34 %, ce qui la place devant 25.9 % des CVE référencées.
Que faire ?
- Vérifiez si zephyr (versions <4.5.0, 1.12.0) est présent sur votre parc.
- Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
- À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
- Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.