CVE-2026-57030
Vulnérabilité élevée dans Junos OS (Juniper Networks)
Description
A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds: user@host> show security flow session | match timeout Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary': user@host> show security flow session summary | match invalid Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot. This issue affects Junos OS on SRX Series: * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S1, 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect releases earlier than 24.2R1;
Gravité et risque d'exploitation
CVE-2026-57030 obtient un score CVSS de 8.2/10, soit une gravité élevée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.38 %, ce qui la place devant 30.6 % des CVE référencées.
Que faire ?
- Vérifiez si Junos OS (versions 25.2, <24.4R2-S1, <24.2R1, <25.2R1-S2, <24.2R2-S3, 0, 24.2, 24.4) est présent sur votre parc.
- Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
- À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
- Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.