CVE-2026-72007

Vulnérabilité non évaluée dans Linux (Linux)

CVSS 0.0 · Non évaluée
EPSS 0.2%
Linux•Linux•Versions : 7.1.5, 6.18.40, <=6.12.*, <87af3ebc112fb3f06753794390daf0f665f151b4, 0, <=7.1.*, <25e252bcf1593b420b12a7231d9dd64b885a2ae2, <4ff3960f3527189bc115a927ed3561c758f562f1, 6.12.97, <=6.6.*, <=6.18.*, 6.6.145, 6.1, <4907f4c2d98b97e640191af5bcf2814ee1034b76, <=*, <c498928f85651b56a4041ea165a22037eae69580, 7.2, a1a5f15f7f6cb5c291f072af843305638c935be6, <6.1

Description

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Per errata[1]: ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX power up/down cycling. Description: VC8000E reset de-assertion edge and AXI clock may have a timing issue. Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is de-asserted by HW) Add a bool variable is_errata_err050531 in 'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround is needed. If is_errata_err050531 is true, first clear the clk before powering up gpc, then enable the clk after powering up gpc. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A

Gravité et risque d'exploitation

CVE-2026-72007 obtient un score CVSS de 0.0/10, soit une gravité non évaluée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.21 %, ce qui la place devant 10.3 % des CVE référencées.

Que faire ?

  • Vérifiez si Linux (versions 7.1.5, 6.18.40, <=6.12.*, <87af3ebc112fb3f06753794390daf0f665f151b4, 0, <=7.1.*, <25e252bcf1593b420b12a7231d9dd64b885a2ae2, <4ff3960f3527189bc115a927ed3561c758f562f1, 6.12.97, <=6.6.*, <=6.18.*, 6.6.145, 6.1, <4907f4c2d98b97e640191af5bcf2814ee1034b76, <=*, <c498928f85651b56a4041ea165a22037eae69580, 7.2, a1a5f15f7f6cb5c291f072af843305638c935be6, <6.1) est présent sur votre parc.
  • Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
  • À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
  • Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.

Références