CVE-2026-97515

Vulnérabilité non évaluée dans Linux (Linux)

CVSS 0.0 · Non évaluée
EPSS 0.1%
Linux•Linux•Versions : 7.2, 6.18.53, 6.1.141, <6.13, 0, 30748ce7e156f221fb91689b338a0d7df77b732a, <1effa3adfe53cb2bb28bf5640a676b791d5ab405, f2985a1de6f53abbc42c7a696ee6ba8bdecc9426, 6.6.93, 6.14.9, 1ea4653cff35c29d1dd0b14ad9c8245e7318f337, <e9b139c4684ed8593a0b779ca02ea05f460b2eec, <5.16, <=6.18.*, 6.12.31, <6.2, 6.15, <6.7, <=*, 5.15.185, <6.15, d231fb443d8d4042f0dd705b93beba8c916a7344, 0541822045ae043d62c941ca31fa76871e436b5e, 0430bf9bc1ac068c8b8c540eb93e5751872efc51

Description

In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state.

Gravité et risque d'exploitation

CVE-2026-97515 obtient un score CVSS de 0.0/10, soit une gravité non évaluée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.14 %, ce qui la place devant 3.4 % des CVE référencées.

Que faire ?

  • Vérifiez si Linux (versions 7.2, 6.18.53, 6.1.141, <6.13, 0, 30748ce7e156f221fb91689b338a0d7df77b732a, <1effa3adfe53cb2bb28bf5640a676b791d5ab405, f2985a1de6f53abbc42c7a696ee6ba8bdecc9426, 6.6.93, 6.14.9, 1ea4653cff35c29d1dd0b14ad9c8245e7318f337, <e9b139c4684ed8593a0b779ca02ea05f460b2eec, <5.16, <=6.18.*, 6.12.31, <6.2, 6.15, <6.7, <=*, 5.15.185, <6.15, d231fb443d8d4042f0dd705b93beba8c916a7344, 0541822045ae043d62c941ca31fa76871e436b5e, 0430bf9bc1ac068c8b8c540eb93e5751872efc51) est présent sur votre parc.
  • Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
  • À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
  • Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.

Références