Heimdall Security Logo

CVE-2026-98014

Vulnérabilité non évaluée dans Linux (Linux)

CVSS 0.0 · Non évaluée
EPSS 0.2%
Linux•Linux•Versions : <5.11, <=6.1.*, <=6.12.*, <2196f9d3358b00fcb28835a5fde14071f51ecb96, 7.2.7, 6.18.53, 0, 5.10.177, <5a2b87dfceccf9065157a14a599d395c2b6281b8, 63546395a0e6ac264f78f65218086ce6014b4494, <6.3, 4df1f2d36bdc9a368650bf14b9097c555e95f71d, 6.6.158, 18cead61e437f4c7898acca0a5f3df12f801d97f, <=6.6.*, 922f56e9a795d6f3dd72d3428ebdd7ee040fa855, 6.1.189, 6.3, <413e04adcc1fd263cf02b1b83b4a0dbdc66bcee9, <5.15.222, 6.2.9, 6f5780536181d1d0d09a11a1bc92f22e143447e2, <=6.18.*, 5.15.222, 6.1.22, <6.1.189, <668e050429c7ca688cf4e7112f97f0cd269d446b, <c0c6f4ba8a37688f7b4d4044898d88f0450d44c2, <=7.2.*, 5.15.105, <=*, <=5.15.*, <72cfcb79026cffb6490f5044153a841d360b0cfc, <69904608e25e8ba58111aadd9210892cf3876201, 6.12.111, 7.3

Description

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, prevent mc_list repopulation during vport disable In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead of esw_vport_change_handle_locked() so vport->allmulti_rule is NULL before the change handler observes it. During FW-fatal recovery the disable runs while dev->state == INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode() fails and returns early, leaving vport->allmulti_rule intact, so esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries to vport->mc_list whose flow rules are then installed in the FDB by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the FDB with those refs still held, corrupting the sub-tree and leaving dangling flow_rule pointers in vport->mc_list. Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`: refcount_t: underflow; use-after-free. tree_put_node+0xef/0x110 [mlx5_core] clean_tree+0x44/0xd0 [mlx5_core] (x5) mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core] mlx5_unload+0x65/0xd0 [mlx5_core] ... mlx5_health_try_recover BUG: unable to handle page fault for address: 0000000003000055 down_write+0x1c/0x60 mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core] esw_del_mc_addr+0x7b/0x170 [mlx5_core] esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core] esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core] mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core] ... mlx5_load ... mlx5_health_try_recover esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule via its local state machine even when the FW del fails. With the rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change handler closes, no rules are installed during disable, and the reload starts with a clean mc_list.

Gravité et risque d'exploitation

CVE-2026-98014 obtient un score CVSS de 0.0/10, soit une gravité non évaluée. Selon le modèle EPSS, la probabilité qu'elle soit exploitée dans les 30 prochains jours est de 0.17 %, ce qui la place devant 6.2 % des CVE référencées.

Que faire ?

  • Vérifiez si Linux (versions <5.11, <=6.1.*, <=6.12.*, <2196f9d3358b00fcb28835a5fde14071f51ecb96, 7.2.7, 6.18.53, 0, 5.10.177, <5a2b87dfceccf9065157a14a599d395c2b6281b8, 63546395a0e6ac264f78f65218086ce6014b4494, <6.3, 4df1f2d36bdc9a368650bf14b9097c555e95f71d, 6.6.158, 18cead61e437f4c7898acca0a5f3df12f801d97f, <=6.6.*, 922f56e9a795d6f3dd72d3428ebdd7ee040fa855, 6.1.189, 6.3, <413e04adcc1fd263cf02b1b83b4a0dbdc66bcee9, <5.15.222, 6.2.9, 6f5780536181d1d0d09a11a1bc92f22e143447e2, <=6.18.*, 5.15.222, 6.1.22, <6.1.189, <668e050429c7ca688cf4e7112f97f0cd269d446b, <c0c6f4ba8a37688f7b4d4044898d88f0450d44c2, <=7.2.*, 5.15.105, <=*, <=5.15.*, <72cfcb79026cffb6490f5044153a841d360b0cfc, <69904608e25e8ba58111aadd9210892cf3876201, 6.12.111, 7.3) est présent sur votre parc.
  • Appliquez le correctif ou la version corrigée indiqués dans les références de l'éditeur.
  • À défaut de correctif, limitez l'exposition (filtrage réseau, désactivation du composant).
  • Automatisez la détection : les agents CVE Heimdall (gratuits, open source) corrèlent l'inventaire de vos serveurs avec la base CVE.

Références

Rechercher une autre CVE